1.888.784.6307
Need to Chat?
Increase your Apple Mac Pro performance with a PRO Memory Upgrade
PRO Memory Upgrade Apple Mac Pro memory prices speak for themselves, affordable and competitive to start plus, we offer the ability to make an offer on any Mac Pro memory RAM expansion kit we sell. All combined with serving our customers with same day shipping, tech support and loads of other helpful computer tips and how to information to assist in your memory configuration. Every Apple Mac Pro memory module expansion PRO Memory Upgrade delivers is made by DRAM manufacturers. We offer the same, brands and part numbers of highly reliable RAM that Apple installs when installing memory modules in new machines to our Mac Pro Apple computer users, not third party memory. Add more memory to your Apple Mac Pro and benefit from quality, price and service delivered from PRO Memory Upgrade.
DDR3 1066MHz Mac Pro memory module diagram for installing additional RAM
The riser cards are easy find and notice the green modules in the image below. There you go....
Do it yourself Apple Mac Pro FB-DIMM memory installation or replacement instruction guide:
Opening your Mac Pro:
- Turn the Mac Pro off.
- Let it cool for about 10 minutes, prior to the installation of the new Mac Pro FB-DIMM memory modules
- Unplug all external cables except the power cord
- Touch metal, that will discard any static electricity from your body
- Hold and slide the access panel door on the back of your Mac Pro
- Lift the latches and remove the access panel and place it on a flat surface that will not scratch it
- The Mac Pro FB-DIMM are easy to identify, they have the metal clips on them.
- Holding the memory riser card by the two finger holes, pull it out of the memory cage and place the card DIMM side-up and put in a flat soft area
- Open the ejectors on the FB-DIMM slot by pushing them out to the sides and then remove the FB-DIMM memory module from the riser card
- Installing the larger capacity or replacement FB-DIMM memory modules:
- Be sure to align the FB-DIMM in the slot on the memory riser card and push both ends of the Fully Buffered RAM down until the ejectors snap back up into place
- Insert the riser card back into the Mac Pro
Replace the access panel, and your installation is complete
