Better made Dell PowerEdge M805 DDR2 667MHz ECC Registered DIMM memory upgrades

Gain system power in your Dell PowerEdge M805 server by installing more memory. Trust PRO Memory Upgrade to provide beyond compatible expansion options for your server with a Dell PowerEdge ECC Registered DIMM RAM upgrade.

• Your Dell PowerEdge maximum RAM capacity: 128GB
• The PowerEdge M805 has 16 memory slots or sockets
• This PowerEdge module upgrade PIN count is: 240-PIN
• The memory speed is: DDR2 667MHz, PC2-5300
• The server DIMM type for your PowerEdge M805 is: RDIMM, ECC REG, ECC Registered DIMM

System Memory - PowerEdge M805

You can upgrade your system memory to a maximum of 128 GB by installing 667-MHz registered DDR2 memory modules in sets of 1-GB, 2-GB, 4-GB, or 8-GB memory modules. (Dual-rank 8-GB modules are supported; quad-rank 8-GB modules are not supported.) Each processor has four memory channels, organized in sets of two channels.

NOTE: If more than four memory modules are installed per processor, the memory modules will be downclocked to operate at 533 Mhz.

Figure 3-12. Memory Locations - PowerEdge M805

General Memory Module Installation Guidelines - PowerEdge M805

To ensure optimal performance of your system, observe the following guidelines when installing your system memory.

• Memory modules must be installed in pairs of identically-sized DIMMs, beginning with slots A1 and A2 (processor 1) and B1 and B2. These slots are marked by white ejector tabs.
  
• All memory modules in the blade must be identical in speed and technology. The memory modules in each pair must be the same size.
  
• Memory must be installed in the same configuration (symmetrically) for both processors.
  
• If pairs of memory modules of different sizes are installed, the larger capacity memory modules must be installed in the lower numbered slots.
  
• Memory sparing is supported if 16 memory modules are installed. (Memory mirroring is not supported.)
  

Table 3-5 shows examples of supported memory configurations.

CAUTION: Memory module blanks must be installed in unoccupied memory sockets to maintain proper cooling airflow.

Table 3-5. Examples of PowerEdge M805 Memory Configurations 

Non-Optimal Memory Configurations

System performance can be affected if your memory configuration does not conform to the preceding installation guidelines. Your system may issue an error message during start-up stating that your memory configuration is non-optimal.

Memory Sparing Support - PowerEdge M805

Memory sparing (spare bank) is supported in systems that have one of the memory configurations shown in Table 3-6. The memory sparing feature must also be enabled in the Memory Information screen of the System Setup program. See "Memory Settings Screen." To use memory sparing, you must disable node interleaving.

Table 3-6. Memory Sparing Configurations - PowerEdge M805